CRM Mitchell1, Author at Silver Arrows Motors

2007 Mercedes-Benz E550
Mileage
122,018
Service Date
5/7/2024
Services Performed
Fuel Smell from Vehicle.
Vehicle has extended crank / Hard start at times.
) Transmission leaking at pan gasket. ) Engine & Transmission mounts worn/collapsed. ) Engine Crankcase vent/cyclone cover leaking. ) Engine Belt dry/cracking.
Replaced both side fuel sender units. Clear all trouble codes and road test vehicle ; no codes redetected.
CANDACE T. gave our service a 5 star review on 5/7/2024
2021 Dodge Charger
Mileage
57,852
Service Date
5/6/2024
Services Performed
Performed Wheel Alignment ; See attached pictures,,, > Found Rear Toe was out of adjustment (Too much Toe in) and Rear Camber is a little on the Negative side, but still within specification. We adjusted the Rear Toe to specification. There are +/- Camber adjustment upper control arms for the Rear available to help correct the camber alignment angles. > Found Front has too much Negative Camber and too much positive Caster. There is also too much positive Toe. We adjusted the Front Toe to specification. However, for the Camber and Caster are adjusted by replacing the Front Subframe bolts with Eccentric adjuster bolts that will shift the subframe in relation to the upper control arms to change the Camber and Caster angles simultaneously. the Client mentioned that he installed lowering suspension springs which has changed the Caster and Camber in the front. The Front subframe adjuster bolts will have little or no effect to bring the front alignment angles back into specifications.
RYAN M. gave our service a 5 star review on 5/7/2024
2014 Mercedes-Benz G63 AMG
Mileage
35,888
Service Date
4/8/2024
Services Performed
Check Vehicle for leaks; found Rt/side valve cover has slight engine oil leaking from seal for injector rail bypass port/vent. Replaced port/vent seal for injector rail. Clean all residual oil and road test for approx 10 miles ; No additional leaks found.
Found hood closed recognition sensor out of adjustment. Re-adjust hood closed microswitch.
RICK C. gave our service a 5 star review on 4/8/2024
2018 Audi Q3
Mileage
78,899
Service Date
2/23/2024
Services Performed
Perform Synthetic Engine Oil & Filter Change
) Engine Air Filter Dusty ; Recommend replace ; Due at 60k miles. ) Ask Client Regarding Previous Service History ; Brake Fluid Flush Service, due every 2yrs ; Cabin Filter Replacement, due every 2yrs/20k ; Spark plugs Replacement, due at 60k ;
NIR H. gave our service a 5 star review on 2/23/2024
2004 Mercedes-Benz SL55
Mileage
53,953
Service Date
2/12/2024
Services Performed
Fault code P2034-008 found for faulty crankshaft position sensor and vehicle will not start at times. Replaced crankshaft position sensor and cleared fault codes, vehicle starts normally at this time
RANDY J. gave our service a 5 star review on 2/13/2024
2005 Mercedes-Benz CL55
Mileage
55,267
Service Date
1/16/2024
Services Performed
Perform Synthetic Engine Oil & Filter Change ; Client Supplied Parts for Oil Change
) Slight oil leaking from engine rear main seal/cover ; Monitor for now, re-inspect at next service visit.
MICHAEL H. gave our service a 5 star review on 1/16/2024
2012 Audi Q5
Mileage
92,989
Service Date
1/10/2024
Services Performed
Perform Synthetic Engine Oil & Filter Change
) Engine Oil Cooler gasket leaking ; Recommend reseal.
TINA R. gave our service a 5 star review on 1/10/2024
2012 Subaru Outback
Mileage
143,559
Service Date
11/29/2023
Services Performed
Perform Synthetic Engine Oil & Filter Change
COURTESY INSPECTION
BATTERY – Remove & Replace – [Includes: Test.]
KARPO- personal C. gave our service a 5 star review on 11/29/2023
2010 Mercedes-Benz C350
Mileage
153,191
Service Date
11/28/2023
Services Performed
Install shim washer on smooth idler pulley.
MIKE H. gave our service a 5 star review on 11/28/2023
2012 Mercedes-Benz CLS550
Mileage
92,051
Service Date
11/28/2023
Services Performed
AUXILIARY BATTERY – Remove & Replace – Front – [Includes: Test.]
Check Vehicle for trouble codes; Engines = P035596 (The actuation of ignition coil 5 has an electrical fault or open circuit. There is an internal component fault ; current code). Recommend to replace ignition coil cylinder #5.
IGNITION COIL – Remove & Replace – Single, Cylinder #5
JARED R. gave our service a 5 star review on 11/28/2023

CRM Mitchell1

We Service and Repair all CRM Mitchell1 cars